Flojet Water Pump Teat Spray - 60 PSI/7.6 LPM
PRICE
$ 515.00 NZD
or 4 payments of $128.75 with Info
WANT TO BECOME A RV PASS MEMBER? CLICK HERE TO REGISTER FOR FREEThe Flojet Water Pump Teat Spray is a self-priming pump with the ability to run dry.
As a part of the Flojet Duplex Industrial Series, the pump is constructed with a polypropylene body and built with a pressure of 60 PSI and flow rate of 7.6 LPM. The pump is ideal for use for liquid transfers, spraying, cooling, circulation, filtration and dispensing and general industrial applications.
Benefits & Features*
-
Self-priming up to 2.4m (8ft) and can run dry without damage
-
Chemically resistant materials
-
Internal bypass standard
-
Built-in back flow preventer
-
Heavy duty ball bearing drive system
-
Body Material: Polypropylene
-
EPDM diaphragm
-
Santoprene check valve
-
High pressure cam
-
60 PSI pressure switch with 3/8 inch NPT female ports
-
230V AC with power cord, no plug motor
-
Vertical prime may vary depending on the fluid viscosity, suction tube size, foot valve and pump configuration
-
Mounted in a dry and adequately ventilated area
-
If mounted in an outdoor environment shield pump from water, dust, sunlight and wash down spray
-
Ports: 3/8” NPT female
-
Weight: 2.28kg
Click here for the Datasheet
*Note: Please do NOT use this to pump flammable fluids, gasoline, kerosene fuel oil, etc. Do NOT use this pump in an explosive environment. The maximum temperature for this pump is and 60°C (140°F).
Barcode # | 202109318 |
Brand | Flojet |
Unit Of Measure | ea |
SKU | 202109318 |