AA Solar Mono PERC Photovoltaic Solar Panel 330W

Pickup and Delivery Options

Enter your quantity and shipping address postcode.

Qty

Postcode

Currently Out of Stock

Benefits & Features

Monocrystalline silicon cells
High-efficiency Passivated Emitter and Rear Contact (PERC) technology
Excellent performance under low light conditions
Strong aluminium alloy frame
Good temperature coefficient enables higher output in high-temperature regions
Certified for salt/ammonia and corrosion resistance
Half-cut: Module consist of smaller cells to lower resistance and reduce power loss
Higher fill factor: Better yield
1.5%– 2.5% power increase
Lower string current and lower Nominal Operating Cell Temperature (NMOT)
Dimensions: 1684mm(h) x 1002mm(w) x 35mm(d)
Weight: 19kg
Warranty: 25 Years Warranty for 80% of Output, 10 Years Warranty for 90% of Output, 10 Years Limited Mechanical Warranty

Click here for the Datasheet

Specifications

Maximum Power (PMAX): 330W
Open-Circuit Voltage (VOC): 41.08V
Short-Circuit Current (ISC): 10.30A
Maximum Power Voltage (VMP): 34.24V
Maximum Power Current (IMP): 9.64A
Maximum System Voltage: 1000V DC
Operating Temperature: -40°C to +85°C
Cable: 4mm²
2x 400mm cables with MC4

Effectively power your off-grid application with the renewable energy of the AA Solar Mono PERC Photovoltaic Solar Panel 340W.

Built with PERC technology and half-cut cells, the solar panel can continue to perform well in lower light conditions and operate efficiently with lower resistance and reduced power loss. The panel also has mechanical warranties.

Regularly wash the panel with washing up liquid and water to clean and help reduce power loss caused by dirt and dust. For greater performance, use the solar panel with the correct solar charge controller.

AA Solar suggest using a MPPT solar charge controller as they are more efficient than PWM.