Enerdrive ePower Gen2 True Sine Wave Inverter 12V/400W

When you need AC power for your motorhome, caravan or boat, turn to the state of the art Enerdrive ePower Gen2 True Sine Wave Inverter 12V/400W as it is easy to use and can efficiently run a number of AC powered appliances. 

This reliable true sine wave inverter features an audio and visual alarm to let you know when it needs checking and the automatic shutdown protects against overloading and overheating. There is also a high surge capacity to cater for appliances that require more start power. 

True sine wave inverters are a popular choice as they provide extended power back-up, decrease electrical noise and increase the life of your appliances by reducing stress on surge protection circuitry. 

Benefits & Features

• Technologically advanced, easy to use and reliable 400W inverter 

• Can run many AC powered appliances 

• Audio and visual alarm with warning to alert user to check inverter before shutdown

• Automatic shutdown protects overload, over temperature and low/high battery conditions 

• High surge capacity for products that require more power to start (constant x 2) 

• High efficiency conversion of battery available power to AC power 

• Mounting brackets for permanent installation 

• Heavy duty DC battery stud connectors 

• Ignitions start terminal for turning the unit on/off using a +12V signal 

• Includes DC battery cable with HD alligator clips and 12V cigarette socket cable 

• Dimensions: 218mm(w) x 152mm(d) x 66mm(h) 

• Weight: 1.1 kg

• 5 year warranty

Specifications

• AC output power: 400W 

• AC output current: 1.74A  

• AC output voltage: 230Vac/50Hz  

• AC output waveform: true sinewave (<5% THD)  

• DC input voltage: 12.5VDC 

• No load current: <0.8A  

• DC operating range: 10.5VDC - 15.9VDC  

• Under voltage alarm: 11VDC  

• Under voltage alarm recovery: 11.3VDC  

• Under voltage shutdown: 10.5VDC  

• Under voltage recovery: 12VDC  

• Over voltage shutdown: 15.9VDC  

• Over voltage recovery: 15VDC  

• Display power indicator: yes (green)  

• Warning and fault indicator: yes (red)  

• Lighter plug cable: 2.5mm² (conductors x 2) use for load <120W  

• Battery clips cable: 10mm² (conductors x 2)  

• Operating temperature: 0°C - 40°C  

• Storage temperature: −20°C - 60°C  

• Relative humidity: 5% - 90% non-condensing  

Click here for the Manual