Aqua Rinse Plus combines performance with freshness. It enables a more effective flush and keeps the flush water clean. The intense lavender fragrance leaves a nice smell in the toilet and Aqua Rinse Plus leaves hygienic protective layer in the toilet bowl. Enjoy a fresh holiday with Thetford Aqua Rinse Plus!
Benefits & Features
- Forms a protective layer to block build-up and bacteria
- Highly effective for a smoother flush
- Improved formula keeps flush water clean
- Lubricates the seals and blade
- Use safely on plastic and ceramic toilet bowls
- Smells fresh long after flushing
- Septic tank safe (Test ISO 11734)
- Available in 1L and 2L bottles
- Can be used on ceramic and plastic toilet bowls
- Coats bowl with protective layer
How to use
Add Aqua Rinse Plus to the flush water tank before filling the tank with water. Dose 100ml per 15L of flush water.
Can you see deposit in the rinse water? No problem! For a fresh and clean start and optimal performance of Aqua Rinse Plus, clean your flush-water tank before the first use by following these instructions.
- Prepare a solution using 100ml household bleach per 10L of flush-water tank capacity. Prepare as much solution as needed to completely fill your flush-water tank.
- Fill the flush-water tank completely with the prepared solution.
- Leave it in for 24 hours.
- Drain the flush-water tank by using the drain tube or flushing system.
- Then fill the flush-water tank completely with fresh water and leave it in for 5 minutes.
- Drain the flush-water tank again.
- Repeat step 5+6 to make sure no bleach is left behind.